Aruba Instant & Cloud Wi-Fi

Reply
Occasional Contributor II
Posts: 18
Registered: ‎03-10-2014

IAP and lost configuration...

Hello

 

I was wondering what could cause an IAP 225 to loose it's configuration after a normal power-off! Any idea's or experiences around?

 

btw: the IAP had just basic configuration with one ssid secured with wpa-psk. no standalone mode. worked for 2 weeks as a single access point and was powered off...

 

thanks

Aruba
Posts: 105
Registered: ‎11-03-2011

Re: IAP and lost configuration...

Config should be committed to flash upon saving, what code build are you running?



| Adam Kennedy, Systems Engineer - adamk@hpe.com

| Service Providers – Aruba, an HPE Company

| Twitter: @adam8021x | Airheads: akennedy
Super Contributor I
Posts: 300
Registered: ‎12-01-2010

Re: IAP and lost configuration...

I had once in my IAP135 but was on a much older code, after the upgrade it is fine. You may want to buckup your configure and then upgrade to the latest firmware.

Normal Guy
Occasional Contributor II
Posts: 18
Registered: ‎03-10-2014

Re: IAP and lost configuration...

Thanks for your contributions! Indeed the AP didn't run on the newest firmware. It's now upgraded to the newest one and we'll see if the problem is fixed...

 

 

Super Contributor I
Posts: 300
Registered: ‎12-01-2010

Re: IAP and lost configuration...

Glad we can help.

Normal Guy
Search Airheads
Showing results for 
Search instead for 
Did you mean: