09-16-2014 07:52 AM
we had a set of 8 IAP105s that where working great, we then added 8 new 115s and no clients apart from guest get DHCP.
i found the installers had not upgraded all the APS to the same firmware version, so i have upgraded them all to the same version 18.104.22.168-22.214.171.124_44641
> This is a flat layer 2 setup so no vlans to add into the mix.
> All 16 appear in cluster
> Tried DHCP on lan ports all fine
Any advice would be great
Solved! Go to Solution.
09-16-2014 01:52 PM
Other dvanced DHCP configurations support up to 2048, you can configure these in the More > DHCP section...