Aruba Instant & Cloud Wi-Fi

Reply
Contributor II
Posts: 52
Registered: ‎12-11-2012

IAP225 power and radio confirmations

[ Edited ]

I have an IAP225 that is connected to a Cisco 4506E switch. The IAP225 is power by POE 802.3at (30watts). What i am seeing is slow connectivity during my speed test (we have a 100Meg metro circuit to the internet). I am wondering where in the IAP225 i can find the radio status to make sure i am not being throttle to 1×3:1SS mode, eventhough i'm am providing it with 30Watts of POE.

 

When i connect to my Motorola AP7131, i can get about 60Mbps down and 55Mbps up. With the IAP225 it seem to be throttle to 10Mbps down and 10Mbps up.

 

 

The IAP225 and the Motorola AP7131 is setup and connect the same way. AP -->Switch-->Router--100Mbps Circuit (Internet).

Guru Elite
Posts: 8,335
Registered: ‎09-08-2010

Re: IAP225 power and radio confirmations

You can run:

 

show ap association

 


Tim Cappalli | Aruba Security TME
@timcappalli | timcappalli.me | ACMX #367 / ACCX #480
Contributor II
Posts: 52
Registered: ‎12-11-2012

Re: IAP225 power and radio confirmations

The "show ap association" command will only so you the client capability not what mode the IAP225 is operating at.

 

Guru Elite
Posts: 8,335
Registered: ‎09-08-2010

Re: IAP225 power and radio confirmations

[ Edited ]

Sorry. Misunderstood your question.

 

 show ap debug system-status | include ic_num_rx_chain=

 spatial-instant.png


Tim Cappalli | Aruba Security TME
@timcappalli | timcappalli.me | ACMX #367 / ACCX #480
Contributor II
Posts: 52
Registered: ‎12-11-2012

Re: IAP225 power and radio confirmations

Thanks bud. For some reason when i input that command, i don't see it.

MVP
Posts: 4,238
Registered: ‎07-20-2011

Re: IAP225 power and radio confirmations

Try this one , is similar to the one tim suggested

2014-04-02 19_37_05-Instant.png

Thank you

Victor Fabian
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
Search Airheads
Showing results for 
Search instead for 
Did you mean: