Aruba Instant & Cloud Wi-Fi

Reply
New Contributor
Posts: 4
Registered: ‎03-27-2013

Inactive ports after RAP-155 conversion

Recently we upgraded our controllers from OS version 6.1.3.9 to 6.3.1.8

 

Before, we have only been using RAP-2 access points as RAP's. Since the EOL of that model was announced, we decided to implement the RAP-155's. In our test environment, we have been able to successfully convert a RAP-155 from IAP to RAP, however, once converted, only ports 0/0 and 0/1 are active.

 

Is it possible to have ports 0/2, 0/3 & 0/4 active ? If so can someone please shed some light on how I should proceed with that?

 

Any and all responses are welcomed and appreciated. 

Aruba
Posts: 1,368
Registered: ‎12-12-2011

Re: Inactive ports after RAP-155 conversion

In your AP Group --> Ap System Profile, you have the option to configure the other ports.  Please reference the Remote AP Validated Reference Design for more info on configuration:

 

http://www.arubanetworks.com/wp-content/uploads/RAPVRD_version_8.pdf

 

Screenshot 2014-06-16 21.18.36.png

Seth R. Fiermonti
Consulting Systems Engineer - ACCX, ACDX, ACMX
Email: seth@hpe.com
-----
If you found my post helpful, please give kudos
New Contributor
Posts: 4
Registered: ‎03-27-2013

Re: Inactive ports after RAP-155 conversion

Thank much Seth

 

Just  made the changes and tested it, works like a charm.

 

Kudos dude.

Search Airheads
Showing results for 
Search instead for 
Did you mean: