Aruba Instant & Cloud Wi-Fi

Reply
Super Contributor I
Posts: 289
Registered: ‎02-07-2013

Installing Instant AP firmware on an AP-225

Hi,

I've got a controller managed AP-225 that I'd like to install the Instant AP firmware onto. I've managed to download and install the latest firmware, but although my DHCP server assigns an IP address and I can https to the AP via my wired network ( no SSID visible from the 225), at the InstantAP login page when I enter admin/admin as the user name/ password I keep getting an invalid username or password message.

 

I can log into the console using admin/admin though, what else do I have to do to be able to log into the AP?

Rgds

A

Aruba Employee
Posts: 1,251
Registered: ‎11-07-2008

Re: Installing Instant AP firmware on an AP-225

You will likely need to factory default it at the console, or hold the reset button. It is an IAP-225 correct?

Jerrod Howard
Sr. Techical Marketing Engineer
Guru Elite
Posts: 8,036
Registered: ‎09-08-2010

Re: Installing Instant AP firmware on an AP-225

Did you factory reset the AP using the hard reset button on the bottom?


Thanks,
Tim

Tim Cappalli | Aruba ClearPass TME
@timcappalli | ACMX #367 / ACCX #480 / ACEAP / CWSP
Super Contributor I
Posts: 289
Registered: ‎02-07-2013

Re: Installing Instant AP firmware on an AP-225

It's not an IAP-225 , its an AP-225 that I've uploadd the latest IAP firmware onto into flash 0

 

 

Super Contributor I
Posts: 289
Registered: ‎02-07-2013

Re: Installing Instant AP firmware on an AP-225

Not yet, did a rest from the console cli.

A

Guru Elite
Posts: 8,036
Registered: ‎09-08-2010

Re: Installing Instant AP firmware on an AP-225

You cannot install Instant software on a non-Instant AP...


Thanks,
Tim

Tim Cappalli | Aruba ClearPass TME
@timcappalli | ACMX #367 / ACCX #480 / ACEAP / CWSP
Search Airheads
Showing results for 
Search instead for 
Did you mean: