01-23-2014 05:04 AM
I have a IAP-3WN managed by an airwave server. I previously used airwave to upgrade the image of the IAP, which succeeded.
However, since this time, the IAP-3WN keeps on rebooting every 20 minutes or so.
From the console I receive the message
AP rebooted Thu Jan 23 13:50:05 UTC 2014; Image Download Failed.
each time the IAP comes back up.
This is strange, because the image already has been downloaded and also shows up correctly to be installed according to boot messages and also according to "show image version":
00:0b:86:8f:07:0b# show image version
Primary Partition Build Time :2014-01-16 22:51:15 PST
Primary Partition Build Version :188.8.131.52-184.108.40.206_41784
Backup Partition Build Time :2013-12-10 19:26:30 IST
Backup Partition Build Version :220.127.116.11-18.104.22.168_0
AP Images Classes
On airwave server, there is no further image upgrade job in the queue.
I'm using firmware 22.214.171.124-126.96.36.199_41784 for the IAP3 and airwave version 7.7.6
Thanks for any hint in this matter!
01-23-2014 06:41 AM
Does the Firmware Upgrade job say that its successful in Airwave? Remove the Firmware Job. It is quite possible that Airwave is not detecting the upgrade properly.
Aruba Customer Engineering
Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base
Validated Reference Design Guides : http://community.arubanetworks.com/t5/Validated-Reference-Design/tkb-p/Aruba-VRDs
01-23-2014 06:48 AM
Actually Airwave states, that the job was successful and that is was deleted:
Thu Jan 23 02:18:11 2014: Starting a pass for Firmware upgrade job Thu Jan 23 02:18:11 2014: Job finished, deleting Firmware upgrade job
And in the firmware upgrade page it shows:
01-23-2014 07:04 AM
Try upgrading Airwave to 7.7.8...
Consulting Systems Engineer - ACCX, ACDX, ACMX
If you found my post helpful, please give kudos