Aruba Instant & Cloud Wi-Fi

Reply
New Contributor
Posts: 4
Registered: ‎01-29-2014

Looking to enable Network-based restrictions on IAP via Airwave to narrow what clients can access

I am looking to restrict client access within the instant config (Airwave) to prevent clients from access specific resources outside their vlan.

Guru Elite
Posts: 8,048
Registered: ‎09-08-2010

Re: Looking to enable Network-based restrictions on IAP via Airwave to narrow what clients can acces

When you edit an SSID, the 4th tab (Access) is where you can set network based restrictions for either the SSID or roles.



Thanks,
Tim

Tim Cappalli | Aruba ClearPass TME
@timcappalli | ACMX #367 / ACCX #480 / ACEAP / CWSP
New Contributor
Posts: 4
Registered: ‎01-29-2014

Re: Looking to enable Network-based restrictions on IAP via Airwave to narrow what clients can acces

Thank you however when i apply the restrictions in the following manner.

 

allow dhcp to dhcpserver 

allow dns to dns server

allow http to internal webserver

then

deny all to all destinations to prevent other access 

i get no ip address on the client

Guru Elite
Posts: 20,418
Registered: ‎03-29-2007

Re: Looking to enable Network-based restrictions on IAP via Airwave to narrow what clients can acces

You need to allow DHCP to any.  The client's first request is not directed at a DHCP server, it is a broadcast, so with your current settings, it will get dropped.



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Search Airheads
Showing results for 
Search instead for 
Did you mean: