01-22-2016 05:33 PM
This is way basic, but, can I use a AP-220-MNT-W1 to put a 215 or 225 on an existing junction box? We will be doing a new roll out of Aruba gear, replacing old Juniper wifi, and most of the locations are drop ceilings, but a few have conduit to junction boxes on the ceilings. From the template, it looks like the -W1 mount has holes in the right places.
Yet, only the instructions for the "secure" version of the mount, the -W2, show mounting on a junction box:
The -W1 instructions don't show anything but a straight wall mount. Is there some reason it doesn't work well on a junction box? ( https://support.arubanetworks.com/Documentation/ta
Or, more generally: is there any difference between the -W1 and the -W2 versions aside from the security enclosure feature? Can I use either one for a basic single gang box?
Thanks for any clues!
Solved! Go to Solution.
01-22-2016 07:33 PM
The W1 mount will not mount to a standard single gang box. The 2 holes in the center of the mount are too close. And the 4 corner holes are too far apart. The W2 does mate up fine with a single gang box.