Aruba Instant & Cloud Wi-Fi

Reply
VS
Occasional Contributor I
Posts: 6
Registered: ‎08-07-2014

On an IAP-275, which ethernet port (WAN or LAN) do I connect to my switch to use POE for power?

I have not yet deployed an IAP-275, but we are installing one for a customer.  In the installation guide, it states that "The WAN port supports 802.3at Power over Ethernet (PoE), accepting 48 VDC (nominal) as a standard defined Powered Device (PD) from a Power Sourcing Equipment (PSE) such as a PoE midspan injector."  Does this mean that ONLY the WAN port will accept POE+ and, therefore, I should plug the ethernet cable from my switch into the WAN port instead of the LAN port?

Guru Elite
Posts: 8,448
Registered: ‎09-08-2010

Re: On an IAP-275, which ethernet port (WAN or LAN) do I connect to my switch to use POE for power?

Eth0

Tim Cappalli | Aruba Security TME
@timcappalli | timcappalli.me | ACMX #367 / ACCX #480
VS
Occasional Contributor I
Posts: 6
Registered: ‎08-07-2014

Re: On an IAP-275, which ethernet port (WAN or LAN) do I connect to my switch to use POE for power?

Thanks for the speedy response. Is Eth0 labeled as such on the IAP-275? Our installers are currently mounting the hardware, so I don't physically have it to look at.
MVP
Posts: 707
Registered: ‎12-01-2010

Re: On an IAP-275, which ethernet port (WAN or LAN) do I connect to my switch to use POE for power?

Here's a photo of the one on my lab-bench right now:

 

 

iAP275-photo.JPG

--Matthew

if I've helped, please give kudos
if I've provided a solution, please mark the solution so others can find it
VS
Occasional Contributor I
Posts: 6
Registered: ‎08-07-2014

Re: On an IAP-275, which ethernet port (WAN or LAN) do I connect to my switch to use POE for power?

Outstanding. I could not find a good picture to reference. The installation doc only says "WAN" and "LAN". Many thanks to you and cappalli.
Occasional Contributor II
Posts: 12
Registered: ‎10-05-2011

Re: On an IAP-275, which ethernet port (WAN or LAN) do I connect to my switch to use POE for power?

Hi Guys Does anyone know where I can get the installation guide for the iAP275? Thanks Mike
Guru Elite
Posts: 8,448
Registered: ‎09-08-2010

Re: On an IAP-275, which ethernet port (WAN or LAN) do I connect to my switch to use POE for power?

Occasional Contributor II
Posts: 12
Registered: ‎10-05-2011

Re: On an IAP-275, which ethernet port (WAN or LAN) do I connect to my switch to use POE for power?

Thanks!
Search Airheads
Showing results for 
Search instead for 
Did you mean: