01-29-2015 09:39 AM
I have a WEMO Belkin Light switch when I goto connect it to the AP it is coming up in the IDS as rogue and the device cannot connect to it, the security levels are set to the lowest point, any ideas?
01-29-2015 09:42 AM
07-08-2015 07:49 AM
I have a similar problem, in that WeMo won't work with Aruba (275/225 in my case). I created a 2.4-only SSID and ran through the configuration with that. I see it appear on Airwave as authenticated, but the unit itself blinks red on its wifi light and I cannot connect the client to it. I've tried factory reset any number of times.
I'll take it home (where I have another one working) and see if maybe getting a firmware update will help here.
Frustrating - I am in a zoo (literally) and have some IP cameras in an animal enclosure that need fairly frequent power cycling. WEMO would be perfect for this, as it can be a hassle to schedule access.
07-08-2015 08:18 AM
No custom service (I wouldn't even know how to do that).
My first WEMO was at home, where I have a Cisco router that puts out separate 5 and 2.4 SSIDs. It was quite straightforward and was operational in 5 minutes.
Trying at work, no joy. I had a few SSIDs which were all multiband. So I created a 2.4 only, just to see.
That SSID is ZooStaff2.4 and something I read will have me try all lower case and no period (zoostaff24) and see if that works.
07-08-2015 08:20 AM
create a custom AirGroup service with the appropriate service IDs.
You can see the service IDs by running show airgroup blocked-service-id