Aruba Instant & Cloud Wi-Fi

Reply
Contributor I
Posts: 36
Registered: ‎05-12-2015

Provisioning IAP to remote AirWave server

Hi everyone.

Just read the startup manual "Setting up Aruba Instant and Airwave"

But it's a scenario when airwave and IAP's are in the same subnet.

How to provision the IAP's to the remote AirWave server behind firewall?

 

MVP
Posts: 1,404
Registered: ‎10-25-2011

Re: Provisioning IAP to remote AirWave server

As long as port 443 to Airwave is open, you can provision your IAPs to talk to it.
Pasquale Monardo | Senior Network Solutions Consultant
ACDX #420 | ACMP
[If you found my post helpful, please give kudos!]
Aruba
Posts: 1,368
Registered: ‎12-12-2011

Re: Provisioning IAP to remote AirWave server

Yes...keep in mind that the communication for IAP and Airwave is ALWAYS initiated and sourced FROM the IAP.  Because of this, Airwave doesn't need to know the remote network IP ranges/subnets and thoeretically, ALL IAPs can be behind a NAT'ed router.  What you do need is 443 opened and Airwave reachable on the public internet if this is the deployment.  If that is the case, you can enable IAP whitelisting so that only subnets you designate are able to log into the Airwave UI.  

Seth R. Fiermonti
Consulting Systems Engineer - ACCX, ACDX, ACMX
Email: seth@hpe.com
-----
If you found my post helpful, please give kudos
Search Airheads
Showing results for 
Search instead for 
Did you mean: