Aruba Instant & Cloud Wi-Fi

Reply
Frequent Contributor I
Posts: 222
Registered: ‎09-14-2011

Quick walk through

I have 2 instant access points, i would like to have the second one mesh up but not re-broadcast the ssid, i want to use it as a bridge and use its ethernet ports (its a 205H) to connect a hardlined machine.

could someone give me a quick walk through?

thanks!

#AirheadsMobile
Scott McNeil - IT Specialist, Global Process Automation
Network+ | CWNA | ACSP | ACMP | ACMA | BREC
Occasional Contributor II
Posts: 16
Registered: ‎09-02-2015

Re: Quick walk through

Maybe this might work if you create different zones and only send out the ssid in one zone and use the mesh in instant. But I have not yet build this setup
Cheers,
Frank
Life off the wire
Aruba Employee
Posts: 367
Registered: ‎11-04-2011

Re: Quick walk through

You will need to broadcast at least one SSID on a Instant Mesh AP, as the AP will consider itself unconfigured as it sees no SSID configured and wipe the config.

 

See: http://community.arubanetworks.com/t5/Aruba-Instant-Cloud-Wi-Fi/Instant-27x-AP-with-Ethernet-Bridging/m-p/262940 for a similar question.

--
If you have urgent issues, please contact your Aruba partner or Aruba TAC.
Search Airheads
Showing results for 
Search instead for 
Did you mean: