Aruba Instant & Cloud Wi-Fi

Reply
Contributor II
Posts: 53
Registered: ‎12-09-2013

RAP 155 wired ports DHCP

I have an RAP 155 IAP. Its WAN port is connected to a switch that hands off DHCP on VLAN1. The wired access ports on the 155 are not getting dhcp addresses. How do I configure those? 

Guru Elite
Posts: 8,458
Registered: ‎09-08-2010

Re: RAP 155 wired ports DHCP

Are you using it as a RAP or IAP?

Tim Cappalli | Aruba Security TME
@timcappalli | timcappalli.me | ACMX #367 / ACCX #480
Contributor II
Posts: 53
Registered: ‎12-09-2013

Re: RAP 155 wired ports DHCP

Iap



Sent from my Verizon Wireless 4G LTE smartphone
Contributor II
Posts: 53
Registered: ‎12-09-2013

Re: RAP 155 wired ports DHCP

Im setting the RAP155 to be a IAP. It eill broadcast SSID on VLAN50. I want the wired ports to be on vlan50 also. How do I configure the wired ports? 

MVP
Posts: 4,271
Registered: ‎07-20-2011

Re: RAP 155 wired ports DHCP

I am assuming that your VLAN 50 will be handled locally by the IAP?

If that's the case then you need to create a local DHCP using VLAN 50 , then create an access wired profile with VLAN 50 then assign it to the port(s) .

 

In this example I am using port 2

 

ip dhcp VLAN50
server-type Local
server-vlan 50
subnet 192.168.50.0
subnet-mask 255.255.255.0
dns-server 192.168.1.103

 

wired-port-profile VLAN50-ACCESS-WIRED-SETTINGS
switchport-mode access
allowed-vlan all
native-vlan 50
no shutdown
access-rule-name VLAN50-ACCESS-WIRED-SETTINGS
speed auto
duplex auto
poe
type employee
auth-server InternalServer
captive-portal disable
no dot1x

 

enet2-port-profile VLAN50-ACCESS-WIRED-SETTINGS

Thank you

Victor Fabian
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
Search Airheads
Showing results for 
Search instead for 
Did you mean: