Aruba Instant & Cloud Wi-Fi

Reply
Occasional Contributor II
Posts: 34
Registered: ‎01-20-2014

[RAP109] Windows filesharing not working

Windows filesharing isn't working on the RAP109s after the upgrade. I have windows 8, windows server 2012, windows 7 and windows vista operating systems in use here and windows filesharing isn't working on any clients connected to the rap109s.

They have full signal and no firewall settings are activated for the SSID to block windows file sharing.

I have to connect them to another access point in order for windows filesharing to work.

I've rebooted computers, restarted the network services in windows, I've redone wireless profiles, I've unshared and re-shared directories, I've disabled the homegroup services, I've disabled all "windows media network sharing" services that some people told me to disable, and I've tried new cables and rebooting access points.

 

I also looked on the IDS page and it has the following but I can't tell it to make the APs I want as authorized or whatever I can't tell them that they aren't "rogue" APs

MVP
Posts: 288
Registered: ‎08-27-2012

Re: [RAP109] Windows filesharing not working

Do you have deny inter user bridging on? That would stop sharing between 2 wireless clients. Wouldn't explain a wired server in the data center through.
ACDX #419 | ACMP |
Occasional Contributor II
Posts: 34
Registered: ‎01-20-2014

Re: [RAP109] Windows filesharing not working

[ Edited ]

Both are disabled. deny is set to off

MVP
Posts: 4,271
Registered: ‎07-20-2011

Re: [RAP109] Windows filesharing not working

Can you take a look at the show datapath session and if there's anything getting blocked
Thank you

Victor Fabian
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
Occasional Contributor II
Posts: 34
Registered: ‎01-20-2014

Re: [RAP109] Windows filesharing not working

what's the command and what do I need to specifically look for? since it might fly by quick

MVP
Posts: 4,271
Registered: ‎07-20-2011

Re: [RAP109] Windows filesharing not working

Show datapath session table <client IP address>
Thank you

Victor Fabian
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
Occasional Contributor II
Posts: 34
Registered: ‎01-20-2014

Re: [RAP109] Windows filesharing not working

I get prse errors. I'm in the instant firmware and not on a controller.

 

I have both the <> and without and I get parse errors

Occasional Contributor II
Posts: 34
Registered: ‎01-20-2014

Re: [RAP109] Windows filesharing not working

However I did it without the IP address and I attatched a screen shot:

 

 

Search Airheads
Showing results for 
Search instead for 
Did you mean: