09-26-2013 12:36 AM - edited 09-26-2013 12:41 AM
I have a little issue with a RAP3 (used as an IAP) and 3G uplink. Here is the situation :
- Configuration is ok for 3G uplink
- 3G is working
- IAP version is 188.8.131.52-184.108.40.206_39461
But the only way to make 3G uplink up is to boot the RAP3 with eth0 connected to the network. In this case, 3G uplink is ok. If I boot the RAP3 only with the 3G key, the uplink never goes up.
Any idea about this ?
Solved! Go to Solution.