Aruba Instant & Cloud Wi-Fi

Reply
MVP
Posts: 1,110
Registered: ‎10-11-2011

Radio power levels

Is there a way to control both radio's power on an IAP-225?  I set one setting in the GUI for min/max tx power, but that's it.  I set the min/max to 15dBm which seems to only apply to 5GHz.  When I issue "show ap bss-table", 2.4 is operating at 21dBM.  Any thoughts?

=======================================
If a reply adequately addresses your issue, please click on the "Accept as Solution" and "Give Kudos" button so this information can benefit other users.
MVP
Posts: 4,120
Registered: ‎07-20-2011

Re: Radio power levels

MASTER-MESH-PORTAL# show  arm config

Minimum Transmit Power            :9
Maximum Transmit Power            :18
Band Steering Mode       :prefer-5ghz
Client Aware             :enable
Scanning                 :enable
Wide Channel Bands       :5ghz
80Mhz Support            :disable
Air Time Fairness Mode   :preferred-access
Client Match             :enable
CM NB Matching Percent   :75
CM Calculating Interval  :30
CM SLB Threshold         :2
CM SLB Balancing Mode    :channel based
CM Max Request           :5
CM Max Adoption          :5
CM Debug Level           :error
Custom Channels          :Yes
2.4 GHz Channels

MASTER-MESH-PORTAL# show ap bss-table

Aruba AP BSS Table
------------------
bss                ess      port  ip           phy   type  ch/EIRP/max-EIRP  cur-cl  ap name             in-t(s)  tot-t
---                ---      ----  --           ---   ----  ----------------  ------  -------             -------  -----
6c:f3:7f:b7:e4:d2  TULOABE  ?/?   192.168.1.3  a-HT  ap    100+/18/22        1       MASTER-MESH-PORTAL  0        21h:12m:36s
6c:f3:7f:b7:e4:c2  TULOABE  ?/?   192.168.1.3  g-HT  ap    11/18/21          1       MASTER-MESH-PORTAL  0        21h:12m:34s

 What version of IAP Os are you running ? I am running the latest 4.1.1.1 and it looks like it works

Thank you

Victor Fabian
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
MVP
Posts: 1,110
Registered: ‎10-11-2011

Re: Radio power levels

4.1.1.1 as well.

 

I set my 2.4 valid channels to 1 only and it's stuck on 6 so I may have a bigger issue here.  Going to reboot the IAP to see if that helps.  Even if it does fix the issue of 2.4 and 5 power levels not matching, is it possible to independantly control their power?

=======================================
If a reply adequately addresses your issue, please click on the "Accept as Solution" and "Give Kudos" button so this information can benefit other users.
MVP
Posts: 4,120
Registered: ‎07-20-2011

Re: Radio power levels

Maybe a 225 issue ? I am using an IAP135
Thank you

Victor Fabian
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
MVP
Posts: 4,120
Registered: ‎07-20-2011

Re: Radio power levels

Unfortunately you can't set that individually , Feature Request ?
Thank you

Victor Fabian
Lead Mobility Engineer @ Integration Partners
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
MVP
Posts: 1,110
Registered: ‎10-11-2011

Re: Radio power levels

Thanks for the info, Victor.

=======================================
If a reply adequately addresses your issue, please click on the "Accept as Solution" and "Give Kudos" button so this information can benefit other users.
Search Airheads
Showing results for 
Search instead for 
Did you mean: