07-04-2013 02:32 AM
Hello there I currently have Instant 93 and 105's with devices using 802.1x authentication using leap on the internal radius server.
This is code Ver 22.214.171.124.
When upgrading to Ver 126.96.36.199 or 188.8.131.52 a default server certificate is installed and the internal radius server starts using Peep which the device does not support.
I have tried using the command clear-cert server which is accepted. But the default certificate does not clear.
Is there any way to clear the default certificate so the internal server starts using leap again.
Or is Leap no longer supported on these firmware versions using the internal server.