11-19-2014 09:21 AM
1.- For this ap's, I need to connect the 2 rj45 ports to the switch or only one?
2.- How can I import a MAC addres list? and how can I use two different list of macs, for example one for one ssid and another for the 2nd ssid? In instant
3.- How can I identify one AP, for example, i wan't to identify the AP with MAC 00:00:00:00:00, does instant have any options, like turn all leds on, or turn all leds of, or blink all leds for 5 minutes, or similar?
4.- Does this ap's are capable for the 2nd wave of 802.11ac? with other brand of ap's the support told me that the 2nd wave are only a software update, not a new ap.
11-19-2014 09:36 AM - edited 11-19-2014 09:36 AM
1. Only one- e0
4. IAP225 are not 802.11ac wave 2 capable. Full support of Wave 2 will require an upgrade on both the hardware and software side, in addition to hardware and software on your clients. If a manufacturer tells you that their devices are wave 2 capable, ask them what chipset they use to find out if it is capable, and ask for a link to the chipset vendor saying so. With that being said, there will probably be early wave 2 AP hardware, but the challenge is to also have wave 2 clients to take advantage of it..
Aruba Customer Engineering
Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base
Validated Reference Design Guides : http://community.arubanetworks.com/t5/Validated-Reference-Design/tkb-p/Aruba-VRDs