Aruba Instant & Cloud Wi-Fi

Reply
Occasional Contributor II
Posts: 48
Registered: ‎05-23-2014

Time limit SSID broadcast

Hi All, My customer is looking to stop broadcasting a guest SSID after opening hours. They would ideally like to have this done as a pair of custom variables, but would settle for a single broadcast time. The plan is to start broadcasting the SSID at 07:00 and turn off the signal at 23:00, disconnecting all users. Is this possible? We are using Aruba instant iAP105 (v6.4.2.0) and Aruba ClearPass (v6.4). I am not sure if this is possible? TIA Gordie
Guru Elite
Posts: 7,828
Registered: ‎09-08-2010

Re: Time limit SSID broadcast

You can't actually stop it from broadcasting, but you can stop users from associating.

 

deny-time-range-vap.png

 

If you actually wanted to stop it from broadcasting, you would need to script a command from an external server to remove the VAP, or schedule something from AirWave.


Tim Cappalli | Aruba ClearPass TME
@timcappalli | ACMX #367 / ACCX #480 / ACEAP / CWSP
Occasional Contributor II
Posts: 48
Registered: ‎05-23-2014

Re: Time limit SSID broadcast

Tim,

Thank you once again. Most helpful ;o)
Occasional Contributor II
Posts: 48
Registered: ‎05-23-2014

Re: Time limit SSID broadcast

Hi Tim,

Just tried to implement this, but I cannot find these settings on the Instant access points. Is this possible on the iAP's, or is it limited to APs using mobility controllers only.

Or indeed, is this something that I need to do in Airwave?

TIA

Gordie
MVP
Posts: 1,399
Registered: ‎10-25-2011

Re: Time limit SSID broadcast

Hi Gordie,
Unfortunately that option that Tim is showing you is for controller based deployments.

For instant, there is no option currently but I believe it is a feature coming out soon.

I invite you to read this post (if you have Airwave), this may be an option
http://community.arubanetworks.com/t5/Aruba-Instant-Cloud-Wi-Fi/mhc-How-to-schedule-broadcasting-SSIDs-using-Airwave-platform/m-p/146270/highlight/false#M4823
Pasquale Monardo | Senior Network Solutions Consultant
ACDX #420 | ACMP
[If you found my post helpful, please give kudos!]
Occasional Contributor II
Posts: 12
Registered: ‎03-25-2015

Re: Time limit SSID broadcast

Available now in 6.4.3.4-4.2.1.0

 

From the release notes:

Time Based Services
Starting with Instant 6.4.3.4-6.2.1.0, users can configure time range profiles using the IAP UI and CLI. These Time Range Profiles can be enabled on an IAP to allow or deny access to an SSID only during a specific period of time.

Frequent Contributor II
Posts: 155
Registered: ‎04-13-2009

Re: Time limit SSID broadcast


leomezza wrote:

Available now in 6.4.3.4-4.2.1.0

 

From the release notes:

Time Based Services
Starting with Instant 6.4.3.4-6.2.1.0, users can configure time range profiles using the IAP UI and CLI. These Time Range Profiles can be enabled on an IAP to allow or deny access to an SSID only during a specific period of time.


I confirm :)

ACMP 6.4 / ACMX #107
Search Airheads
Showing results for 
Search instead for 
Did you mean: