Aruba Instant & Cloud Wi-Fi

Reply
Super Contributor II
Posts: 349
Registered: ‎02-22-2011

Viewing AP radio channel mode for Instant / Airwave

Hi All,

 

when using a mobility controller, you can run the show ap bss table command to identify the channel width and mode (i.e. HT20 / VHT80)

 

What is the equivalent command for instant? Can this be seen in Airwave?

 

Scott

Valued Contributor II
Posts: 804
Registered: ‎12-01-2014

Re: Viewing AP radio channel mode for Instant / Airwave

HI Friend,

 

You can use the same command ( show ap bss-table) to get this information, look at "PHY" column. Airwave do not have any such command.

 

Please feel free for any further query on this.

Cheers,
Venu Puduchery,
[Is my post helped you ? Give Kudos :) ]
MVP
Posts: 1,399
Registered: ‎10-25-2011

Re: Viewing AP radio channel mode for Instant / Airwave

Hi scottdoorey,
as Venu mentions, run 'show ap bss-table' on the CLI for both the controller and IAP.
Venu, you can definitely run this command on Airwave.
Simply Navigate to the IAP-VC that you are interested in and select the drop down "Run command for all APs" and select "AP BSSID Table".
Pasquale Monardo | Senior Network Solutions Consultant
ACDX #420 | ACMP
[If you found my post helpful, please give kudos!]
Super Contributor II
Posts: 349
Registered: ‎02-22-2011

Re: Viewing AP radio channel mode for Instant / Airwave

thanks all for the responses. Looks like i'll be raising a feature request!

Search Airheads
Showing results for 
Search instead for 
Did you mean: