12-06-2012 06:19 PM - edited 12-06-2012 06:36 PM
I am setting up Dell W-iAP93. I have AP's in 2 different subnets (192.168.0.x & 192.168.8.x)
I am unable to see the AP in 192.168.8.x on the Virtual Controller on 192.168.0.x.
I thought I had the settings correct under Settings --> General --> L3 Mobility but nothing.
The sites are connected over our MPLS and we can ping in both directions.
Any suggestions or ideas... Thanks!
12-06-2012 07:56 PM
You wont see it as if they are on differnet networks they will create different Virtual controllers
Layer 3 mobility will let you roam between those 2 APS
Product Manager - Aruba Networks