12-23-2016 12:23 AM
We are still using IAP-105 & 93 in our organization without any problem and now we wanted have more IAPs -205/215. Whether this new IAPs will sync with existing models..? Please clarify.
Solved! Go to Solution.
12-23-2016 05:04 AM
- The last version of Instant that supports the IAP-93 is 126.96.36.199
- The last version of Instant that works with the IAP-105 is 188.8.131.52-184.108.40.206.
- The IAP 205 and the IAP 215 support starts with instant 220.127.116.11 http://www.arubanetworks.com/assets/ds/DS_AP200Ser
To support the IAP-105, IAP-93, IAP-205 and IAP-215, you must stick with software that is not better than 18.104.22.168-22.214.171.124
In other words, if you want to run instant 4.2.x.x, you need to replace your IAP-93s. If you want to run instant 4.3.x.x, you need to replace your IAP-93s and your IAP-105s. To run all of them you would just need to run a version of 4.1.1.x (like 126.96.36.199)
I hope that makes sense.
Aruba Customer Engineering
Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base
12-23-2016 05:45 AM
Currently running firmware in (IAP105, IAP93) is : 188.8.131.52- 184.108.40.206_52666
Any version below to 220.127.116.11-18.104.22.168 will sync each other, right...?
12-23-2016 05:56 AM
01-23-2017 11:35 PM - last edited 2 weeks ago