Aruba Instant & Cloud Wi-Fi

Reply
Occasional Contributor I
Posts: 5
Registered: ‎03-12-2013

can you use AP groups in Aruba instant Virtual controllers? to limit a broadcast of an SSID to AP's

can you use AP groups in Aruba instant Virtual controllers? to limit a broadcast of an SSID to limited number of AP's like the aruba controller?

 

also and you do the same with 2.4 and 5 Ghz? turn off 2.4 on all but a few APs? on the same virtual controller

 

Guru Elite
Posts: 8,203
Registered: ‎09-08-2010

Re: can you use AP groups in Aruba instant Virtual controllers? to limit a broadcast of an SSID to A

Use the "Zone" settings. These are similar to AP groups in controllers.

 

http://www.arubanetworks.com/techdocs/Instant_41_Mobile/Advanced/Content/UG_files/CustomizeIAPParams/Conf_zone_settings.htm


Tim Cappalli | Aruba ClearPass TME
@timcappalli | ACMX #367 / ACCX #480 / ACEAP / CWSP
Aruba Employee
Posts: 200
Registered: ‎07-14-2013

Re: can you use AP groups in Aruba instant Virtual controllers? to limit a broadcast of an SSID to A

You can use the AP Zones feature to control which AP broadcast which SSID. Just assign a zone name to an SSID and then to the APs that should broadcast it.

You can also turn off the 2.4G or 5.0G client access function on individual APs by putting a particular radio on a particular AP to Air Monitor mode.

Thanks,

Yan Liu
Search Airheads
Showing results for 
Search instead for 
Did you mean: