Aruba Instant & Cloud Wi-Fi

Reply
Occasional Contributor II
Posts: 36
Registered: ‎03-14-2014

clients are disconnecting and Access point power change is I

Hi,

Clients are disconnecting frequently in IAP integrated with Airwave.

 

EIRP settings are Min and  Max are 18.

 

In ARM summery it shows that reason for power change is I (Interference) or M(invalid channel ).

 

I have changed EIRP min from 18 to 3 will it work is there any solution ?

 

Regards

Siva.

 

Guru Elite
Posts: 20,807
Registered: ‎03-29-2007

Re: clients are disconnecting and Access point power change is I

You should make the ARM minimum 12 and Maximum 18.  Having a low of 3 is too much of a range.

You should enable "Broadcast Filter ALL" on all of your SSIDs.

Make sure you are using 20 mhz channels, so you can have as much channel reuse as possible (disable Wide and 80 mhz channels)

 



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Occasional Contributor II
Posts: 36
Registered: ‎03-14-2014

Re: clients are disconnecting and Access point power change is I

Hi ,

Please find the attached Logs reports and


i think there is a interference at site and how can i resolve this issue.

this cluster manages the other aps.

please help for resolution and how i can verify this.

regards
Siva.
Guru Elite
Posts: 20,807
Registered: ‎03-29-2007

Re: clients are disconnecting and Access point power change is I

There are no logs attached.

 



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Search Airheads
Showing results for 
Search instead for 
Did you mean: