04-11-2014 10:12 AM
i'm using AP-125 for frist time
so need help to connect Ap-125 to pc by console cable and what software i need to config it
thats the frist time i use the console config so plz help me
Solved! Go to Solution.
04-11-2014 10:13 AM
You need a controller for the AP125 to work....
Aruba Customer Engineering
Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base
Validated Reference Design Guides : http://community.arubanetworks.com/t5/Validated-Reference-Design/tkb-p/Aruba-VRDs
04-11-2014 11:00 AM
you will need to point that AP to a controller.
Using a console cable using putty : http://www.chiark.greenend.org.uk/~sgtatham/putty/
and then you have the following commands:
04-11-2014 11:07 AM - edited 04-11-2014 11:07 AM
what a controller ? is it software
The AP-125 cannot operate on its own; it needs a mobility controller as cjoseph suggests. The mobility controller is an appliance that centrally manages campus based access points (including the AP-125).
Systems Engineer, Northeast USA
ACCX | ACDX | ACMX