Aruba Instant & Cloud Wi-Fi

Reply
Contributor I
Posts: 45
Registered: ‎09-11-2010

how to config IAP RAP3 work with 3g dongle ?

Hi all,

 

I tried to test IAP RAP3 with 3g dongle (vofafone Huawei K4511) but no luck it doesn't work. it's alway showing "Linkdown"

 

please see logs below. 

 

*********************************************************************************************************  

3/10/2013 18:24:11 PM    Target: 00:1a:1e:08:50:7f    Command: show cellular status *********************************************************************************************************

cellular status

---------------

card     detect     link

----     ------     ----

Present  detect-ok  Linkdown

USB Modem Information

---------------------

Parameter      Value

---------      -----

Manufacturer    Vodafone

Product         Vodafone

Serial Number   Driver          (none)

Vendor ID       12d1

Product ID      14cc

 ===================================================

 

and this is my configuration

 

cellular configure
------------------
Type            Value
----            -----
4g-usb-type    
usb-type        option
usb-dev         12d114cc
usb-tty         ttyUSB0
usb-init        AT+CGDCONT=1,"IP","internet"
usb-user        web
usb-passwd      web
usb-dial        ATD*99#
usb-modeswitch  -v 0x12d1 -p 0x14b7 -M 55534243123456780000000000000011062000000100000000000000000000
modem-isp      

 

 

anyone can help?

Thanks in advance

 

MVP
Posts: 1,405
Registered: ‎05-28-2008

Re: how to config IAP RAP3 work with 3g dongle ?

[ Edited ]

Hi.

 

Full instructions including supported modems can be found in the Instant 6.1.3.4-3.1.0.0 user guide.    It is in Chapter 24: Uplink Configuration.

 

 

*ATTACHED TO THIS POST FOR YOU* (read chapter 24 very very good)

adasd.PNG

*****************2Plus Wireless Solutions****************************
Aruba Airheads - Powered By community for empower the community
************ Don't Forget to Kudos + me,If i helped you******************
Guru Elite
Posts: 20,821
Registered: ‎03-29-2007

Re: how to config IAP RAP3 work with 3g dongle ?


aakmit wrote:

Hi all,

 

I tried to test IAP RAP3 with 3g dongle (vofafone Huawei K4511) but no luck it doesn't work. it's alway showing "Linkdown"

 

please see logs below. 

 

*********************************************************************************************************  

3/10/2013 18:24:11 PM    Target: 00:1a:1e:08:50:7f    Command: show cellular status *********************************************************************************************************

cellular status

---------------

card     detect     link

----     ------     ----

Present  detect-ok  Linkdown

USB Modem Information

---------------------

Parameter      Value

---------      -----

Manufacturer    Vodafone

Product         Vodafone

Serial Number   Driver          (none)

Vendor ID       12d1

Product ID      14cc

 ===================================================

 

and this is my configuration

 

cellular configure
------------------
Type            Value
----            -----
4g-usb-type    
usb-type        option
usb-dev         12d114cc
usb-tty         ttyUSB0
usb-init        AT+CGDCONT=1,"IP","internet"
usb-user        web
usb-passwd      web
usb-dial        ATD*99#
usb-modeswitch  -v 0x12d1 -p 0x14b7 -M 55534243123456780000000000000011062000000100000000000000000000
modem-isp      

 

 

anyone can help?

Thanks in advance

 


Please open a support case.  This modem is not on the list of tested/supported so it could require some custom parameters for the RAP3.



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Regular Contributor I
Posts: 171
Registered: ‎04-13-2009

Re: how to config IAP RAP3 work with 3g dongle ?

I have already use this 3g key with RAP (RAP5) and ArubaOS 6.x and it works !

 

My settings (for ArubaOS):

  • Device : Other (Any)
  • TTY Device Path : ttyUSB0
  • Initialization String : AT+CGDCONT=1,’IP’,’APN’
  • Device Identifier : 0x12d114cc
  • Device Type : option
  • Modeswitch : -v 12d1 -p 14b7 -M 55534243123456780000000000000011062000000100000000000000000000
  • Dial String : ATDT*99***1#
  • Link Priority Ethernet : 10

Replace APN by your APN Provider

ACMP 6.4 / ACMX #107
Search Airheads
Showing results for 
Search instead for 
Did you mean: