Aruba Instant & Cloud Wi-Fi

Reply
Occasional Contributor I
Posts: 5
Registered: ‎05-08-2015

iAP 105 not accepting default password

Hi Airheads,

 

I tried "factory reset" button and cli "factory_reset, purgeenv, save & reset". However, the iAP 105 is still not accepting the default user/pw "admin/admin". Kindly help.

 

Thanks,

 

Valued Contributor II
Posts: 804
Registered: ‎12-01-2014

Re: iAP 105 not accepting default password

Hi,

 

Which code you are using ? what is the error message it throwing ?

 

Please feel free fo any further help on this.

Cheers,
Venu Puduchery,
[Is my post helped you ? Give Kudos :) ]
Occasional Contributor I
Posts: 5
Registered: ‎05-08-2015

Re: iAP 105 not accepting default password

Hi, ArubaOS Version 6.3.1.4-4.0.0.5 (build 43022 / label #43022) There is no error: User: admin Password: User: I already put admin/admin, password/forgetme! but i still can't get in the cli. Regards,
MVP
Posts: 1,408
Registered: ‎10-25-2011

Re: iAP 105 not accepting default password

I suggest using the push pin to factory reset on the IAP vs using the factory_reset command. Try that and see if it works.
It seems that your factory reset is not erasing the previous user/pass. Try the push pin
Pasquale Monardo | Senior Network Solutions Consultant
ACDX #420 | ACMP
[If you found my post helpful, please give kudos!]
Occasional Contributor I
Posts: 5
Registered: ‎05-08-2015

Re: iAP 105 not accepting default password

I also tried that method but still not able to get in via admin/admin default credentials

 

Thanks,

MVP
Posts: 1,408
Registered: ‎10-25-2011

Re: iAP 105 not accepting default password

Have you tried this

community.arubanetworks.com/t5/Controller-less-WLANs/How-do-I-reset-the-password-of-an-IAP/ta-p/181306
Pasquale Monardo | Senior Network Solutions Consultant
ACDX #420 | ACMP
[If you found my post helpful, please give kudos!]
Search Airheads
Showing results for 
Search instead for 
Did you mean: