Aruba Instant & Cloud Wi-Fi

Reply
New Contributor
Posts: 1
Registered: ‎06-17-2016

iap-205hIAP-205H setup IP camera on POE port

I have IAP-205H running behind a POE+ power strip (Wifi-Texas WS-GPOE-AT-12-56v240w). 

Setup IPCamera_port_profile to include POE enabled, native VLAN "guest", uplink enabled on port 0/3.

I set USB disabled to prevent power usage there. eth ports 0, 1, 2, 4 are all set to "default_wired_port_profile" which has them admin disabled, POE off.

 

Tested connectivity by plugging in a laptop and verified in wired client list, plus accessing Internet.

Camera is a QSee QCN-8004B which is 802.3af requiring 6 watts. The PSE is supposed to provide 10 watts from 802.3at. Camera does not even try to boot when plugged into the port.

 

2nd issue: When I come out of the port and into a POE injector, the camera boots, but I cannot access via web browser or RTSP protocol. I don't see any firewall rules to block inbound access.

 

I thought this would be a great and secure way to power my cameras, get flicker-free uploads for the video, and reduce the network runs.

 

Any thoughts on things I've overlooked? Appreciate the guidance.

Bill

 

Search Airheads
Showing results for 
Search instead for 
Did you mean: