Aruba Instant & Cloud Wi-Fi

Reply
New Contributor
Posts: 3
Registered: ‎10-19-2014

is it possible to have APs with different country codes linked to the same Master VC?

See Subject Header.

Guru Elite
Posts: 20,576
Registered: ‎03-29-2007

Re: is it possible to have APs with different country codes linked to the same Master VC?

Since the country code is set at the VC, that would be no.


Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

New Contributor
Posts: 3
Registered: ‎10-19-2014

Re: is it possible to have APs with different country codes linked to the same Master VC?

I two US APs in my Home lab and one Worldwide. The US versions is of cause
fixed and one of those is the one I prefer to be VC.
At what level does the discovery protocol for Joining run? I suspect L2. Is
that correct.

If I can not use all my APs in the samr VC I will end up with 2 VCs
(correct ?)

Even by using two different IP subnets will this will still cause problems
if the are on the same VLAN? Actually default VLAN.

I f was to simulate solution with 2 APs in the US and one in a remote
network in EU linked to the same network, what do I need to do?
Aruba Employee
Posts: 151
Registered: ‎02-14-2013

Re: is it possible to have APs with different country codes linked to the same Master VC?

It will not join the cluster of the existing VC nor it'll become a separate VC. You need to convert it to standalone mode and use it with a different country code on the same VLAN. 

Thanks,
Rajaguru Vincent
Search Airheads
Showing results for 
Search instead for 
Did you mean: