06-12-2015 03:23 PM
I have a brand new deployment of 13 IAP-215's running 18.104.22.168-22.214.171.124_46028. Anytime I try to do a firmware update I get the message, "Another upgrade is in progress"
Even if I reboot all the AP's in the VC, I still get the error.
Solved! Go to Solution.
06-12-2015 07:04 PM
If you take just 1 IAP and try to upgrade it what happens?
Have you looked through the system logs to see if there is something going on?
ACDX #420 | ACMP
[If you found my post helpful, please give kudos!]
06-13-2015 12:01 AM
Can you clarify couple of things here,
1. Is it working setup ? ( in production)
2. Are these managed by Airwave or central ?
please clarify the above. also share the out put of "show log system" we can fix the issue.
[Is my post helped you ? Give Kudos :) ]
06-16-2015 03:54 PM
I saw nothing the system logs whatsoever. However, I was able to resolve this by starting over.
I powered off all the radios but one. Factory reset it and started from scratch. From there everything worked fine after bringing the others up.
Thanks for the suggestions.