07-16-2015 01:01 PM
I'm trying to allow a segment of our users access to a specific VLAN on our network. We currently have two VLANS; VLAN1 - 10.1.0.0/24 network VLAN1000 - 192.168.57.0/24 network. I'm wondering what the best option is to have specific users use VLAN1000 when they connect to the wireless network.
We had a DHCP server that is set to hand out the IPs for the two scopes and it works via wired connection. One thing I've noticed is I have to set the switch port to switchport access vlan1000 if I want them to grab the proper IP. Could this be a hinderance to getting wifi to work?
Any direction anyone can point me in is greatly appreciated.
Solved! Go to Solution.
07-16-2015 01:04 PM
07-16-2015 01:22 PM
If you want to stick with what you have today, you can use user derivation rules which will require you to know all of the user's MAC addresses that you want to put into that VLAN.
07-16-2015 01:24 PM
We have plans to convert over to RADIUS in the future, but that is a larger project on the backlog. Since this is the "in-between" project, what about getting a secondary SSID setup? Where would I find information on how to set that up properly to pull those IPs from the DHCP server?
07-16-2015 01:27 PM
07-16-2015 01:35 PM - edited 07-16-2015 01:35 PM