Configure Time Manually on IAP 93

[hemagadro]

can you guys help me out in configuring Time and date manually on my IAP 93 because i put NTP server and time zone and time is not right its 2001 !! My NTP server is pool.ntp.org

[cjoseph · Accepted solution]

Do it from the commandline and SSH or telnet into the IAP:

00:24:6c:ca:cb:b0# clock ?
set Set the time and date

00:24:6c:ca:cb:b0# clock ?
set     Set the time and date
00:24:6c:ca:cb:b0# clock set ?
<year>     Year
00:24:6c:ca:cb:b0# clock set 2012 ?
<month>     Month
00:24:6c:ca:cb:b0# clock set 2012 9 6 ?
<hour>     Hour
00:24:6c:ca:cb:b0# clock set 2012 9 6 6 ?
<min>     Minutes
00:24:6c:ca:cb:b0# clock set 2012 9 6 6 4 ?
<sec>     Seconds
00:24:6c:ca:cb:b0# clock set 2012 9 6 6 4 

[hemagadro]

thx for your reply but i think the VC refused the connection through Telnet and SSh gives me this is there an option at the UI to open Telnet?!!

Connecting To 172.27.2.57...Could not open connection to the host, on port 23: Connect failed

[hthakker · Accepted solution]

In order to enable telnet on the iAP,
1. log into the webUI of the VC
2. click on "Settings"
3. Click on "Show advanced options"
4. Under the "General" tab on the RHS you will see an option "Terminal Access"
5. Click on the drop down and select "Enabled"
6. click OK.

[hemagadro]

Thank you very Much all done now