09-18-2012 10:49 AM
Is it possible to enable SSH on my RAP-3 that operates the Instant network? I can see it on the network.
Nmap scan report for 192.168.104.242
Host is up (0.010s latency).
Not shown: 995 closed ports
PORT STATE SERVICE
80/tcp open http
443/tcp open https
4343/tcp open unicall
8080/tcp open http-proxy
8081/tcp open blackice-icecap
Solved! Go to Solution.
09-18-2012 11:32 AM
Telnet is disabled by default, and you can enable it from the web UI of the Virtual controller.
Here is a KB to enable telnet on IAP.
09-18-2012 11:41 AM - edited 09-18-2012 11:55 AM
Thanks HT - I'm getting used to the UI now
The option has moved though and should be updated in the KB. It's under Settings >> Show Advanced Options >> General
(there should be an image here)
That seems to work. Here are some telnet results:
00:1a:1e:08:59:79# show ip interface brief Interface IP Address / IP Netmask Admin Protocol br0 192.168.104.242 / 255.255.0.0 up up 00:1a:1e:08:59:79#