Configuring NTP server

Configuring NTP Server

 

Summary

This solution template generates configuration codes to add an NTP server to your Aruba Mobility Controllers. The "ntp server" option is the global configuration code and needs to be configured on the master controller. All global configuration codes will be pushed from the master controller to all of the local controllers after a successful "write mem" operation. Both the "clock timezone and clock summer-time" options are local configurations, which need to be configured on each local controller depending on the physical locations.

The iburst option will enable faster clock convergence by generating more frequent NTP requests to the NTP server. Turn this off once the clock is synchronized to reduce the number of queries.

 

Platform Tested

Aruba Mobility Controller 3400 running AOS 6.2.1.1 build 38111

 

Configuration Notes

The system provides a set of default values for different US cities. You are recommended to change the NTP server to your preferred local or closet NTP server.

 

Example:

 

Licensing

None

 

References

User Guide: Setting the system clock. Page 730

 

 

Version history
Revision #:
1 of 1
Last update:
‎09-17-2014 01:44 PM
Updated by:
 
Contributors
Tags (1)
Search Airheads
Showing results for 
Search instead for 
Did you mean: 
Is this a frequent problem?

Request an official Aruba knowledge base article to be written by our experts.