ArubaOS and Controllers

Reply
Occasional Contributor I
Posts: 7
Registered: ‎04-13-2009

AP Mounting kits ??

Looking to see the exact Bill of materials that makes up these (3) different mounting kits. Part numbers are the same, but prices have changed

thanks for any help

OAW-AP105-MNT OmniAccess AP105 Wall/Ceiling Mounting Kit

OAW-AP105-MNTC OmniAccess AP105 Ceiling Mounting Kit (rail adapters only)

OAW-AP105-MNTD Aruba 105 Access Point Mounting Kit (contains 2 brackets for flat surface or wall box mounting; DC power connector accessible)

:rolleyes:
Guru Elite
Posts: 21,274
Registered: ‎03-29-2007

Re: AP Mounting kits ??

The first is the mounting kit which countains a surface-mounted, as well as standoff mount

The second is just ceiling rail adapters which adapts to non-standard mounts

The third is the mounting kit which contains a surface-mounted, as well as standoff mount, but does not block the power connector, in case you want to power using the power brick instead of POE. The third exists because some users mount to the ceiling and DO use the power brick to plug into the power connector, which is not accessible in kit #1.


Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Search Airheads
Showing results for 
Search instead for 
Did you mean: