ArubaOS and Controllers

Reply
Occasional Contributor I
Posts: 8
Registered: ‎05-02-2009

Activating a Firewall License

We have 30 controllers (all 6000) scattered around a wide geographical area. It is not very convenient to access these controllers physically.

Our network management tried adding firewall licenses to each controller and resulted in “users unable to connect to wireless network”.

ps All ports were trusted.

What is the best practice to installing a firewall license? What policies/rules to be created right after adding the license if this firewall will not be utilized “just added for future plans”.

OS 3.3.2.20


Thanks in advance
Aruba Employee
Posts: 12
Registered: ‎08-31-2009

Re: Activating a Firewall License

Hello Abdullah,

Just check the role the users are assigned when they connected to the wireless network and give the necesarry permissions to that role.

Regards

Oguzhan Eren
Occasional Contributor I
Posts: 8
Registered: ‎05-02-2009

Re: Activating a Firewall License

Thanks. Allow all policy for now should do the trick as you suggested.
Search Airheads
Showing results for 
Search instead for 
Did you mean: