ArubaOS and Controllers

Reply
New Contributor
Posts: 3
Registered: ‎05-09-2011

Captive Portal authentication on Microsoft NPS

Hello,

I'm trying to authenticate my users throught the Captive Portal using Microsoft NPS on Windows2008R2.

NPS is configured and works with another SSID (that is not using Captive Portal).

When i try to authenticate, the portal answers me 'Authentication Failed' but into the NPS logs and Windows Events, the authentication is successfull !!?!

What's the requirements for the Captive Portal ?
Could you please help me ?

Steve.
Guru Elite
Posts: 20,561
Registered: ‎03-29-2007

Re: Captive Portal authentication on Microsoft NPS

In your network policy, make sure "pap" is selected:



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

New Contributor
Posts: 3
Registered: ‎05-09-2011

Re: Captive Portal authentication on Microsoft NPS

Hello cjoseph,

Many thanks!! it's Working :p

PAP is non-encrypted, it's strange. Are the password transfered in non-encrypted mode into the network ?

Steve.
Guru Elite
Posts: 20,561
Registered: ‎03-29-2007

Re: Captive Portal authentication on Microsoft NPS

From the controller to the radius server, yes. From the client to the controller, if the captive portal is https, it is encrypted.


Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

New Contributor
Posts: 3
Registered: ‎05-09-2011

Re: Captive Portal authentication on Microsoft NPS

Ah ok ;) Many thanks for your precious help !
Search Airheads
Showing results for 
Search instead for 
Did you mean: