ArubaOS and Controllers

Reply
fn
Occasional Contributor II

Certificate not used for 802.1x

Dear Sirs!

I'm using Version 3.4.3.2 on 3600 controller.

I just installed a server certificate as described here:
"http://support.arubanetworks.com/Default.aspx?tabid=111&loc=https://kb.arubanetworks.com/cgi-bin/arubanetworks.cfg/php/enduser/std_alp.php?p_sid=op-EI5lk"
If the link does not work. It is answer id 772 in kb.

My new (own) certificate (with appended certificate chain) is used+shown+accepted by all clients on captive portal and WebUI-authentication.
BUT: with 802.1x authentication (termination on controller) still the build in certificate is presented to the clients.
I also did already reboot the controller without success.

What's wrong?
fn
Occasional Contributor II

Re: Certificate not used for 802.1x

Answer from support:

certificate for 802.1x is only supported with 1024 bits :mad:
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: