ArubaOS and Controllers

Reply
New Contributor

Certificate on local controller

I have 1 master and 2 local controllers. Each box has its own trusted CA cert installed. If a client connects to an AP on the master controller the client sees the correct certificate. If a client connects to an AP on one of the locals the client sees the default securelogin.arubanetworks cert.

Users have been still been able to authenticate and connect to the network but I don't know why they are seeing this default cert.

Can anyone help with this?
Aruba Employee

Re: Certificate on local controller

Make sure your custom cert is being used. In the GUI, go to Configuration -> Management -> General. In there you can select which cert is used for WebUI authentication and Captive Portal.
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: