ArubaOS and Controllers

Reply
New Contributor
Posts: 1
Registered: ‎05-15-2011

Controller 3400 & AP175 installation

Hi guys,

sorry but i'm pretty new on the Aruba world, i have a 3400 controller with ArubaOS 5.0.3.3 installed and i've connected an AP175 to GE1/0 port but i can't see the AP.

I run the initial setup with dhcp server enabled and i had licenses installed too.

So, what's the problem? I should be see the AP in the AP Installation>AP Campus whitelist or maybe into AP Wizard setup??

thanks!!
leighton
Guru Elite
Posts: 21,260
Registered: ‎03-29-2007

Re: Controller 3400 & AP175 installation

Is the AP getting an ip address from the controller? Do a "show ap database" to see if that access point ever contacted the controller. Also, do a "show ip dhcp binding" to see if it might have gotten an ip address. Can you plug a wired client like a laptop into the controller and get an ip address?


Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Search Airheads
Showing results for 
Search instead for 
Did you mean: