ArubaOS and Controllers

Reply
New Contributor
Posts: 1
Registered: ‎07-20-2009

Initial-role in aaa profile does not pushed to the local controller

A aaa profile initial-role needs to change in the local controller. After modifying in the master controller, I did not see the updates reflect on the local controller. Is there any missing link?
Thanks,
Janet
Guru Elite
Posts: 19,964
Registered: ‎03-29-2007

Show switches

Please type "show switches" on the master to see if the changes have propagated from the master controller to the local.
Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Validated Reference Design Guides : http://community.arubanetworks.com/t5/Validated-Reference-Design/tkb-p/Aruba-VRDs
MVP
Posts: 485
Registered: ‎04-03-2007

Re: Initial-role in aaa profile does not pushed to the local controller

Look at the third to last line in the following command:

If it says "Configuration Changed since last save", you need to save the configuration on the master to push it to the locals.

If does not say that, look at "show switches" like Colin suggests to see if there was a problem pushing out the config.
==========
Ryan Holland, ACDX #1 ACMX #1
The Ohio State University
Search Airheads
Showing results for 
Search instead for 
Did you mean: