ArubaOS and Controllers

Reply
MVP
Posts: 880
Registered: ‎04-13-2009

LAG between Controller and HP Switches

Hi All,

Does anyone have experience of setting up link aggregation (port channel, etherchannel or whatever you want to call it) between Aruba controllers and HP Switches?

I'm familiar with setting up etherchannel between Cisco switches and aruba controllers and was wondering if anyone had any tips or knew any caveats with HP switches?

Thanks
James
Cheers
James

-------------------------------------------------------
-------------------@whereisjrw-------------------
------------------------blog-------------------------
ACCX #540 | ACMX #353 | ACDX #216
-----------Mobility First Expert #11----------
-------------------------------------------------------

If a reply adequately addresses your issue, please click on the "Accept as Solution" and "Give Kudos" button so this information can benefit other users via search.
MVP
Posts: 286
Registered: ‎11-04-2008

LACP Aruba-HP H3C

HP H3C switch:
#
interface Bridge-Aggregation10
description "LACP to Aruba WC03"
port link-type trunk
port trunk permit vlan 1 to 2 20 to 21 101 3999
link-aggregation mode dynamic
#
For each H3C interfaces in LAG:
#
interface GigabitEthernet1/10/0/24
port link-type trunk
port trunk permit vlan 1 to 2 20 to 21 101 3999
port link-aggregation group 10
#
For each Aruba interfaces:
#
interface fastethernet 1/0
description "FE1/0"
trusted vlan 1-4094
lacp timeout short
lacp group 0 mode passive
#
You must trusted the lag (thanks to Colin http://airheads.arubanetworks.com/vBulletin/showthread.php?t=4066 )
#
Int port-channel 0
Trusted
#

Good luck!
~Trinh Nguyen~
Boys Town
Search Airheads
Showing results for 
Search instead for 
Did you mean: