ArubaOS and Controllers

Reply
Occasional Contributor II
Posts: 17
Registered: ‎03-10-2010

Multiple VLAN

I have 3400 aruba contoller and the current setup by ARUBA tech staff was
VLAN 1 172.16.50.254/24 wireless Int Gi1/0
VLAN 5 192.168.5.254/24 wired Int Gi1/1

all working fine, I wish to add another vlan 10 and the IP address is 192.168.100.1/24 in Int Gi1/2 port
I was able to confiure the network and DHCP no problem IP was automatically assigned using 192.168.100.2-253 range. The problem is I couldn't get to internet. Could you please advise for some missing config?

I used CLI:

config t
vlan 10
int vlan 10
ip address 192.168.100.1 255.255.255.0
no shut

Int Gig 1/2
switchport mode access
switchport access vlan 10
end

Config t

ip dhcp pool Poolname
default-router 192.168.100.1
dns-nameserver 4.2.2.1
network 192.168.100.0 255.255.255.0

end


Thanks,
BOni
Moderator
Posts: 53
Registered: ‎04-09-2007

Re: Multiple VLAN

Boni,

Do you need to NAT that IP space on the way out? If so, add a "ip nat inside" to the VLAN 10 interface.

If not, does the rest of your network know how to get back to the 192.168.100.0/24 subnet?

Regards,

Austin
Occasional Contributor II
Posts: 17
Registered: ‎03-10-2010

Re: Multiple VLAN

yeah, thanks missing ip nat inside
Search Airheads
Showing results for 
Search instead for 
Did you mean: