ArubaOS and Controllers

Reply
New Contributor

RAP wired clients

I have a customer that uses RAP's only for wired connectivity. I noticed that wireless clients show up under Monitoring > Controller > Clients but wired clients do not. Is there any way to get them to show?

Thanks in advance,

Jimmy
Aruba Employee

Re: RAP wired clients

What version of AOS is on the controller? All my wired clients show up.
Guru Elite

Re: RAP wired clients


I have a customer that uses RAP's only for wired connectivity. I noticed that wireless clients show up under Monitoring > Controller > Clients but wired clients do not. Is there any way to get them to show?

Thanks in advance,

Jimmy




You need to make the wired port profile untusted.


Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Contributor I

Re: RAP wired clients

Also keep in mind that most wired clients don't authenticate when connecting to the network. Without authentication, you will only see the clients MAC address listed in the Monitored->Clients list. No userID/machineID unless you use some type of auth.
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: