ArubaOS and Controllers

Reply
New Contributor

Unable to read domain results file

Hello,

I am getting below error log from our APs (AP-105):

sapd: <311018> |AP AP_Name@AP_IP sapd| Unable to read domain results file

Everything works normally, but I would like to know what this is and get a rid of it.


BR,
Teemu
Occasional Contributor I

Re: Unable to read domain results file

We are getting the error also... I think it may have started with 5.0.2 (I don't remember seeing it in 5.0.1). We see the error both in a 3200 and a 651.
Occasional Contributor I

Re: Unable to read domain results file

Messages definitely go away by going back to 5.0.1.0. Seems like the 5.0.2 release was causing problems for us (users could ping the controller but not past it - could be a port aggregation issue, but did not feel like troubleshooting, so rolled back to 5.0.1.0). Will try again when 5.0.3 is out :-)
New Contributor

Re: Unable to read domain results file

I am also getting the same error.


-Bink
Aruba Employee

Re: Unable to read domain results file

That appears to be a bug, engineering says they are working on it and you can ignore it, sorry about that.

-awl
Andy Logan, ACDX
Director, Strategic Account Solutions
Aruba Networks
Occasional Contributor II

Re: Unable to read domain results file

We're also seeing the error on 5.0.2, 6000 controller.
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: