ArubaOS and Controllers

Reply
New Contributor
Posts: 2
Registered: ‎01-18-2011

cpboot partition type (if any) unrecognized

Hello new to the forum, so please bare with me.

We have an Aruba 6000 controller, wiped the flash, and came to the
cpboot>

We did these commands

setenv ipaddr ?
setenv netmask ?
setenv gatewayip ?
setenv serverip ?
We are able to ping the tftp server.

then we use this command

upgrade 0

and we receive this error

Partition type (if any) unrecognized.

We are at a lost as to how to put the system file back onto flash.

When we do a

>part

it displays three different partitions, 0,1,2

any advice will help at this point
Guru Elite
Posts: 21,281
Registered: ‎03-29-2007

Re: cpboot partition type (if any) unrecognized

Please contact support. Instructions will vary based on the platform.


Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

New Contributor
Posts: 2
Registered: ‎01-18-2011

Re: cpboot partition type (if any) unrecognized

Their response was that the Sup card was bad. It has been RMA
Search Airheads
Showing results for 
Search instead for 
Did you mean: