ArubaOS and Controllers

Reply
New Contributor

exact cli command for user-debug

I am trying to enable debugging for one wireless client that seems to be dropping network access randomly. The command i am putting into the CLI is

(Aruba3400) #configure terminal logging level debugging user-debug 001b77471433


I keep getting the following error when i hit enter


Aruba3400 #configure terminal logging level debugging user-debug 001b77471433 ^
% Invalid input detected at '^' marker.

any ideas?CL
Guru Elite

Re: exact cli command for user-debug

the mac address needs to be in the format xx:xx:xx:xx:xx:xx

The letters need to be in lower case.

To see the debug, "use show log user-debug "


Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Occasional Contributor II

Re: exact cli command for user-debug

How do I show log user-debug and specifically drill down to the user's Mac I wan to see.  I only see the option for "all".

Guru Elite

Re: exact cli command for user-debug

show log user-debug all | include <mac address>

 

Please also see http://community.arubanetworks.com/t5/Technology-Blog/Two-Different-Ways-to-Debug-a-User-on-Aruba-and-Why-You-Would/ba-p/77006



Colin Joseph
Aruba Customer Engineering

Looking for an Answer? Search the Community Knowledge Base Here: Community Knowledge Base

Occasional Contributor II

Re: exact cli command for user-debug

Thanks

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: