captive portal with wpa-psk

[juancarlos.per…]

Hi all!

I would like to configure my ssid "guest" with wpa-psk encryption with passphrase, once the guest type the correct word the controller redirect to captive portal.

I'm trying to configure this, but the controller shows the following message:

Error processing command 'wlan ssid-profile "ssid-guest" opmode wpa2-psk-aes':Error: dot1x profile needs to be enabled in aaa profile "aaa_guest" to support opmode "wpa2-psk-aes" configured in ssid profile "ssid-guest"

anybody knows what commands i should type to enable dot1x profile in aaa profile "aaa_guest"?

maybe the questions is so easy but i'm not sure about the config, so i prefer to ask here before doing something wrong.

The config of "aaa_guest":

aaa profile "aaa_guest"
initial-role "role-guest-logon"
dot1x-default-role "role-guest-authen"

thanks in advance!

[cjoseph · Accepted solution]

---

juancarlos.perezromero@telindus.es wrote:

Hi all!

I would like to configure my ssid "guest" with wpa-psk encryption with passphrase, once the guest type the correct word the controller redirect to captive portal.

I'm trying to configure this, but the controller shows the following message:

Error processing command 'wlan ssid-profile "ssid-guest" opmode wpa2-psk-aes':Error: dot1x profile needs to be enabled in aaa profile "aaa_guest" to support opmode "wpa2-psk-aes" configured in ssid profile "ssid-guest"

anybody knows what commands i should type to enable dot1x profile in aaa profile "aaa_guest"?

maybe the questions is so easy but i'm not sure about the config, so i prefer to ask here before doing something wrong.

The config of "aaa_guest":

aaa profile "aaa_guest"
initial-role "role-guest-logon"
dot1x-default-role "role-guest-authen"

thanks in advance!

---

try :

config t

aaa profile "aaa_guest"

authentication-dot1x defalt

[juancarlos.per…]

thanks it works!

now clients has to enter the wpa2 key and after they will be redirected to captive portal.

thanks!

[cjoseph]

Glad that we can help!

[ahmad.osman@ha…]

i facing the same issue , but i want to know what the cause of this error ??

[cjoseph]

Use the WLAN/LAN Wizard to create the Captive Portal to Avoid that error.

[cjoseph]

Wpa-psk requires a 802.1x profile in the AAA profile. You see that error when it is not configured. The wizard creates it automatically.

[ahmad.osman@ha…]

i tried to make it by the wizard many time , but nothing happen also the same error when i try to make a new AP group or new SSID