Campus Switching and Routing

Reply
New Contributor
Posts: 4
Registered: ‎03-19-2017

Create a testing environment

Hi all,

 

I posted previously and got a really helpful answer in moving my  "router on a stick" to using the HP Aruba Switch for routing. The customer wishes to proceed with this and so I'd like to get everything working in a software lab first.

 

Hardware: HP Switch 5412zl (J8698A)

Version: K.15.17.0012, ROM K.15.30

 

The other switches can be generic as they are only going to operate on L2.

 

Can I download a simulator of this switch for testing? I've installed HCL onto a test environment but can't find where to download specific devices. Any help would be massively appreciated.

 

Thanks,

 

Phil

 

Aruba Employee
Posts: 50
Registered: ‎02-12-2016

Re: Create a testing environment

Hi Phil, The 5412 or similar switches don't have simulator support. HCL is is for all Comware based switches. Hope this helps!!!

New Contributor
Posts: 4
Registered: ‎03-19-2017

Re: Create a testing environment

Thanks Dobias,

 

It certainly helps in that I can't pre-test my setup. Any ideas what I might be able to do rather than just implement the changes to a production environment?

 

 

Aruba Employee
Posts: 50
Registered: ‎02-12-2016

Re: Create a testing environment

Do you have contacts with an Aruba SE? They can probably get you some temporary switches.

Search Airheads
Showing results for 
Search instead for 
Did you mean: