Campus Switching and Routing

Reply
Occasional Contributor II

Debug ACL 's on Aruba 3810

 

How to debug ACL on the Aruba 3810 

 

I have an ACL and i want to debug the deny statement at the end and I am currently not getting any result.

If i use the command

 

show statistics aclv4 101 port trk1 

 

I get the hits,

 

but i was trying to get is log or screen outputs for the the packets allowed and denied.

 

i have used the following commands

debug acl

debug destination session

 

 

I dont get any output form the ACL's but i do see hits on the ACL's

 

Any ideas?

 

Re: Debug ACL 's on Aruba 3810

Hi,

 

I think you can do the following:

- Indeed add log to permit/deny ACE entry

- Configure Syslog server and facility logging

- Enable 

     - debug destination logging

     - debug destination session

- debug acl

 

What will happen is details will be forwarded for first packet that hits log ACE entry. Than a wait timer starts for around 5 minutes and summary will be forwarded. This timer can also be configured with access-list logtimer <seconds between 30-300>.

 

Hope this will help you!

 

Regards, Dobias

 

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: